The XTC Carbon Fiber Graphite Turf Toe Relief Insole supports, stabilizes, and reduces big toe joint range of motion,while allowing your smaller toes free range of motion. This rigid, flat orthotic insole treats turf toe, hallux limitus, hallux rigidus, and arthritis of the big toe. Universal right or left. Two sizes. 1/pkg.
- The Flat Carbon Graphite Turf Toe Plate is an easy fit for dress shoes, tennis shoes and work boots.
- The rigid plate can be worn under the insert that comes with your shoe or used in conjunction with an over-the-counter shoe insole or Rx orthotic.
- The XTC is flat with no contoured arch.
- It is important to wear your plate in a shoe that does not have a very flexible sole, as the lack of rigidity will put stress on your plate when you flex your foot.
- Use double-sided tape to keep in place.
Regular: 8" long and 1/16" thick. Weighs approximately 1 oz. See the Measurements tab for width.
Long: 10 1/4" long and 1/16" thick. Weighs approximately 1.5 oz. See the Measurements tab for width.
Placement: The key to good placement is to make sure the morton's extension piece is underneath your big toe, regardless of where the back of the plate ends on your foot. We strongly suggest using 2-sided tape to adhere the Carbon Graphite Turf Toe Plate - Flat to the underside of your current orthotic or arch support.
Indications: The XTC Carbon Fiber Graphite Turf Toe Relief Insole is used in the treatment of turf toe, hallux limitus, hallux rigidus, arthritis, and great toe fractures.
Foot Care Tip! What are the differences among the carbon graphite fiber insoles sold at Myfootshop.com?
These four carbon fiber plates are best used to treat hallux limitus and hallux rigidus and turf toe:
Return Policy: Defective Insoles & Arch Supports may be returned for replacement or credit up to 6 months from the date of purchase. Here's a link to our return policies and procedures.
SKU#: M972
Question:
I really only need a turf toe plate for my forefoot. Do you have anything shorter?
Answer:
The Turf Toe Plate- Flat is the shortest and lightest turf toe plate that we offer. The length is acutally critical for limitation of range of motion of the great toe joint. You need the weight of the foot on the proximal portion of the plate to limit the range of motion of the great toe joint. To limit the range of motion of the joint, you really don't want to go any shorter.
____________________________________________________________________________________________
Question:
I love this insole but it is constantly shifting towards my heel. How do I keep it from sliding?
Answer:
We recommend holding it in place with some double sided sticky tape, once you get it place properly.
_______________________________________________________________________________
Question:
I'm an avid rock climber. Unfortunately, I have a rare cancer that will require amputation of my big toe from the last knuckle forward ("distal phalanx amputation"). Is there an insert that you think could help me climb after the amputation?
I would be prepared to modify an existing insert to fit, or have one custom-manufactured... Climbing is important to me. Thanks!
Answer:
Really interesting question. The thing about climbing shoes is that they’re a bit like ballet shoes in that you really want to be able to feel the surface that you’re on (the floor with ballet and the rock with climbing). So how can you do that without a great toe?
I spoke with my son who’s a climber about your question. He explained to me that most ‘newer’ climbing shoes are designed with a slip last. A slip last is a shoe design where the walls of the shoe, inside and out, come together in a single seam right down the middle of the shoe from the heel to the toe. A slip last is great for this in that it wraps the foot (ballet slippers also use a slip last). He said that many of the newer shoes are applied to the foot a bit like an Ace Wrap in that they use the slip last to wrap the foot and put rubber only on the ball of the foot and the toe. The other downside of the newer design climbing shoes is that there’s an intentional arch to the shoe that would preclude you from using any kind of arch support in the shoe. I don’t think this style of shoe would be a good choice for you post amp.
My son suggested either a big wall shoe or an approach shoe that would be a little more traditional without the focus on slip last design. In that case you could place either a flat turf to plate glued to the underside of the insole of the approach shoe or use a flat foot plate to line the entire bottom of the shoe.
Another consideration is to have an orthotics and prosthetics shop place what’s called a toe plug on the insert. The toe plug takes of the space vacated by the toe. That’d be a must to have.
Please let us know how this works out for you. Both my son and I would appreciate how you solve this. Watching him climb this past weekend makes me realize the challenge you have here. Would love to hear how you solve this.
______________________________________________________________________________
Question:
How can these fit in any shoe when they are only 8: long? I tried them in my 10.5" shoes, and I just don't get how they are supposed to fit.
Answer:
It is 'one-size-fits-most', but that means you do need to play with the positioning of the product in your shoe. It doesn't matter if the back of the plate is all the way into the heel area of your shoe; you should place it so that the toe extension is where you want it (underneath your big toe), which would mean the back of the plate may not go all the way to the heel area of your shoe.
____________________________________________________________________________________
Question:
Are these for either the right or the left foot?
Answer:
They can be worn on either foot; just flip them over to place the extension underneath your big toe. They are also one-size-fits most. Once you have determined the best placement in your shoe, use double-sided tape to keep it in place.
Question:
Just received my Turf Toe plate. The Morton's extension ends about mid-way up my big toe and digs into the bottom of it. Is this normal? I am assuming the plates are to be placed under the existing insole. Can the plates only be worn in shoes where they can be placed under the existing insole or is there another option?
Answer:
The extention that goes under your big toe does end before the tip of the shoe, but should be long enough to hit the fat pad past the toe joint. It is recommended that you wear it underneath the insole of your shoe for comfort reasons, as it is so hard. It can be worn in shoes where the insole won't come out, if that is what you wish to do, but it is much more comfortable to put some cushion on top of it, such as the Pedag Soft Shoe Insoles.
Question:
I really only need a turf toe plate for my forefoot. Do you have anything shorter?
Answer:
The Turf Toe Plate- Flat is the shortest and lightest turf toe plate that we offer. The length is acutally critical for limitation of range of motion of the great toe joint. You need the weight of the foot on the proximal portion of the plate to limit the range of motion of the great toe joint. To limit the range of motion of the joint, you really don't want to go any shorter.
More questions? You can find additional answers in our customer support portal or simply click chat at the top of the page.
